The whole machine consists of a transmission part (motor, reducer, coupling, electric control unit), a rotating part (rolling grinding cylinder), and a feeding and discharging part.

Power assembly: Main motor 1.5kw-4G-50Hz/380V, No.2 BLED cycloidal pin wheel reducer.

Transmission mode: Horizontal direct connection with elastic coupling.

Grinding cylinder speed: 41 r/min.

Grinding cylinder volume: 98L; Charging volume: 37L.

Cylinder wall thickness: The inner cylinder wall is 8mm thick, with grinding ribs welded on it to enhance the grinding effect. The cylinder is made of 201 stainless steel.

Cylinder dimensions: Inner cylinder Φ500mm * length 500mm.

Overall dimensions: Approx. length × width × height 1450mm * 600mm * 1250mm.

Cylinder structure: Horizontal single layer. The inner cylinder shares one inlet and outlet with a diameter of 280mm. The feed inlet of the inner cylinder is equipped with a double-layer cover plate (solid cover and filter cover, filter aperture ≤8mm).

Others: The discharge port is 400mm from the ground.

Electric control: The electric control box is equipped with equipment safety switch, time timer, and forward and reverse electric switch.